Impact-absorbing safety surfacing and tiles for play areas: surfaces that cushion falls, compliant with EN 1177 and required under equipment with a free fall height above 600 mm.
Safety surfacing is the surface that absorbs the impact of a fall from a piece of play equipment. It is not an optional extra: it is the requirement that makes the rest of the play area safe to use.
The European standard EN 1177 specifies the method for determining impact attenuation of playground surfacing. Where the free fall height exceeds 600 mm, or where equipment involves forced movement, typically roundabouts and springers, the impact area must present specific shock-absorbing properties. The content of the standard is summarised on our Standards page.
The surface to be treated does not correspond to the footprint of the equipment: the whole impact area must be taken into account, determined by the height and the type of movement involved. Surfacing is therefore sized during the feasibility check on the site, alongside the selection of equipment, rather than estimated by the square metre at a later stage.
It is an item of particular relevance to local authorities and schools, as it is subject to verification at handover and during periodic inspection of the play area.
Safety surfacing is checked during the periodic inspection of a play area, together with anchorages and moving parts. It is the item that most frequently determines the outcome of an inspection, because an area with correctly specified equipment but inadequate surfacing is not compliant.
Where several pieces of equipment stand close together their impact areas overlap, and a single continuous surface is generally preferable to separate treated zones, both for compliance and for maintenance.