Certificate in accordance with European Standards EN 1176 by the German TÜV Product Service.Structure made of wood laminated pine timber autoclave with non-toxic salts.Parts list:N°1 turret with wooden posts section 9x9 cm equipped with gabled roofs and protective panels both made of mahogany plywood okoumé grooved phenolic-glued and no edges. Equipped with a bench in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films. Dim. cm 101x78x350 h.N°1 slide h. 150 cm, with track-bent stainless steel, sides made of mahogany plywood okoumé with phenolic adhesive.As an alternative to steel slide can be mounted in a tunnel or chute in an open polyethylene.N°1 ladder with rungs made of iroko Ø 45 mm mahogany plywood okoumé grooved phenolic-glued and no edges.N°1 bridge with nylon climbing rope made with internal steel cable coated in nylon locking nut and colorful.N°1 turret pool with wooden posts section 9x9 cm equipped with protective and decorative panels of mahogany plywood okoumé grooved phenolic-glued and no edges. Dim cm 101x78x260 h.N°2 perches made of tubular galvanized steel at 180°C.N°1 and climbing wall shaped pantograph, made with birch plywood panels finished with phenolic adhesive film on both sides and colored resin marble colored handles.N°1 swing with wooden posts section 9x9 cm and the beam section of tubular galvanized steel 8x4 cm rectangular painted to 180°C. The seat is rubber bumper with internal aluminum profile and chain-mesh welded and hot-galvanized.All the wooden parts are treated with high-colored stain penetration, non-toxic, wax-based water-soluble.Assembled by 8.8 galvanized steel bolts and nuts. Elements covernut under colored nylon. Attacks in galvanized metal, for anchoring to the ground.